Parramatta is one of the oldest settled parts of the country, so it holds early colonial cottages, grand Victorian homes and Federation houses alongside dense modern infill — all on clay soils near the Parramatta River. The older masonry was built with no effective damp-proof course on damp, low-lying river ground, while newer slab homes sit on reactive clay that cracks footings. Rising damp in the old stock and slab-edge moisture in the new are both common.
We confirm whether moisture is rising through the walls, sitting in the subfloor or coming through a cracked slab edge, then treat the real cause — a damp-proof course and breathable render for older homes, or slab-edge and drainage work for newer ones — so the repair holds.
Parramatta mixes heritage homes with no damp-proof course and newer slab homes on reactive river clay. Ground moisture rises through old brick or pushes in at a cracked slab edge, leaving salts that blister paint, blow plaster and rot timber — and if left, migrate into the structural masonry where repairs cost far more.
Parramatta's homes on river-flat clay hold damp under the floor. An underfloor ventilation system dries the subfloor and clears the smell.
Older brick and historic homes near the river often lack a working damp course. Our DPC injection stops moisture rising.
We re-coat with a breathable salt-resistant plaster system.
Our mould remediation clears growth and resolves the damp cause.
We waterproof and tank below-ground walls and wet areas near the river.
A free damp assessment pinpoints the cause with a fixed quote.
Parramatta has early colonial and Victorian homes on damp river-side clay with no effective damp-proof course, alongside newer slab homes on reactive clay. Failed courses, damp footings and moving clay make rising and slab-edge damp common in Harris Park, Granville and Rydalmere.
All of them — including Parramatta, Harris Park, Granville, Rydalmere, Dundas, Ermington, Epping, Carlingford, North Parramatta, Westmead, Oatlands, Telopea. If your suburb is not listed, call us; we cover the whole area.
Yes. Early Parramatta homes need a damp-proof method suited to old brick or stone on damp river ground, and a breathable lime or salt-resistant render so the historic walls keep drying. We match the treatment to the building and its setting.